Our Flir One Pro thermal imaging camera shows some noticeable differences in heat soak throughout the cooling tower itself between 50% and 100%, which is to be expected. Omitting AVX instruction sets allows for accurate, 100% loads at chosen clock speeds, while allowing AVX instructions would provide higher, albeit, unrealistic synthetic CPU loads and excessive heat production, less indicative of real-world use. Prime95 v29.4b8 (no AVX) is used for two-hour intervals, one managing fans at 50% PWM and the other at 100% PWM with RPM measurements being taken every three seconds and averaged across the duration of each two-hour capture. 7C70v12)Ĭorsair Dominator Platinum RGB, 16GB (2x8GB) DDR4-3600ĬrystalFontz CFA-633-TMI-KU, 4x Dallas One Wire WR-DOW-Y17 sensorsĬorsair Commander Pro, 100%/50% PWM Speed profiles (liquid cooling pump always if applicable)ĭata comparisons are based on data collected from testing performed on our new Intel i9-10850K system, including re-visiting many previously covered products which were originally covered on the prior testing platform which pivoted around an i7-5930k (4.20ghz Cooler Master Hyper 212 EVO V2 at Amazon for $39.99 Intel Core i9-10850K LGA1200 (Comet Lake), all 10 cores 4.6Ghz 1.190v, (3.60Ghz stock speed, single core boost 5.2Ghz)
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |